FACH Air filter + reducer+ lubricator | 1/2"

The compressed air preparation unit constist of:

The diaphragm reducer and the gauge are used to reduce the inlet pressure to the value set by the operator with a knob and to keep it precisely at the specified level. The pressure gauge allows you to easily control the pressure at the outlet of the regulator. The pressure value is given in MPa 1Mpa = 10bar.

The filter is designed to remove solid contaminants such as rust, dust, and liquids such as water, oil from the compressed air. The filter cartridge is made of bronze sinter for mechanical particle filtration of 40 microns. The filter cartridge is fixed and does not need to be replaced. Operation of the filter is reduced to manually draining the condensate from the tank with the drain valve. The FACH series filters are widely used in pneumatic tools (grinders, rivets, pneumatic tools), pneumatic tools and machines, pneumatic actuators, balancers, wheel aligners. Because of its high mechanical strength, they are excellent as pre-filters for the protection of compressed air receivers. Durable construction and attractive purchase price are an interesting alternative for small and medium sized businesses.

The lubricator (oiler) is used to lubricate the compressed air with oil for the certain type of application. Adjustment of the dosage allows creating satisfactory oil mist that significantly extends the service life of the pneumatic tools as well as the entire system, and where necessary to ensure proper conditions of use.

Technical data:

• Max. operating pressure [bar]: 10
• Filtration rate [μm]: 40
• Max. flow P=7 [l/min]: 4000
• Connection thread: 1/2 "w