Fast-drying product designed for sealing seams, joints and welds in the parts of car-body. Provides a flexible sealing ensuring excellent protection against water, moisture, dirt and dust. After curing doesn’t crack and creates smooth layer, which can be painted with all lacquer systems. Can be applied by nylon brush or putty knife.

• Color: light grey
• Capacity: 0,85kg
• Base: synthetic rubber and resins
• Appearance: thixotropic paste
• Skin time: 3 – 4 min. (in 25°C)
• Specific gravity: 1,20 ± 0,02 g/cm3
• Drying time: 24 h. (in 25°C, thickness 1 mm)
• Overpaintable: after fully dry (24 h.)
• Ambient temperature: 15 ÷ 35°C

Covered surface must be clean, dry, dedusted, degreased.

• Recommended is to pretreat surfaces with suitable primer
• Product should be applIed on the surface in required thickness.
• Formed layer should be left untouched until complete drying. Therefore further forming is not required.

Caution: For safety reasons always comply with information provided in the Material Safety Data
Sheet for the given product.

Store the product in a sealed container, in dry and cool places, away from fire and heat sources, as
well as direct sunlight. Storage temperature 15-30°C.