Please wait...
Welcome! login / register en | EUR
Basket: products: 0 / PRICE: 0.00 EUR
Subscribe to our newsletter to know about newest products and promotions.

T4W PIK FÜLLER+ Primer HS 5:1 3L

37.25 EUR
Netto: 30.29 EUR
Product features:
Product code: 59293
Warranty: 1 years
Weight: 5.0 kg (1 szt.)
Availability: In stock
Amount (min. 1 szt.):

Total: 37.25 EUR

Two-component filler on the basis of hydroxy-acrylic resin. It has excellent filling properties as well as good adhesion to the puttied surface. It is recommended to use under one and two-component acrylic topcoats, synthetic or water-borne. Destined for manual/machine treatment with sanding dry and wet materials. This filler is particularly suitable for filling surfaces of bodies in automotive industry, steel structures protected with anticorrosion primers. This is a perfect product for filling steel and polyester-glass surfaces, previously repaired with polyester putties and hard plastics, used in motorization.

The surface must be cleaned, dry, degreased and matted. Mixing ratio: 5:1 by volume and add thinner for acrylic products 20 - 25 % vol.. Mix thoroughly. Apply with a spray gun with nozzle diameter 1,6 - 1,8 mm in 2 - 3 normal coats with 8 - 10 min. flash off at 20°C between the coats. Drying 30 min. at 60°C or 5 - 7 hours at 20°C. Sand dry with P320 - P400 or wet with P800 - P1200.

Technical data:

  • Efficiency: 5 m2/l
  • Density: 1,56 - 1,58 g/cm³
  • Shelf-life: 12 months
  • VOC content: 2004/42/IIB(c)(540)<540
  • Spray viscosity: 5 - 30 sec. at 20°C, Ford cup 4 mm
  • Pot life: up to 2h at 20°C
  • Spray gun: Nozzle diameter: 1,6 - 1,8 mm
  • Application: 2-3 normal coats
  • Flash-off: 8 - 10 min. at 20°C
  • Drying time: 30 min. at 60°C, 5-7 h at 20°C

2,5 L + 0,5 L Hardener
Dry sand:
Wet sand:
Add a comment  Have an opinion on this product? Please share it with other buyers.

We will be more than happy to answer all your questions regarding this product. Just use the form below.