polski (pl)
Deutsch (de)
T4W Epoxy primer 2K 10:1
|
10.30 EUR
Netto: 8.37 EUR |
Product features:
Volume
Color
|
|
Product code: 59070
Warranty: 1 years Weight: 1.0 kg (1 szt.) Availability: In stock
Amount (min. 1 szt.):
Total: 10.30 EUR |
||
|
|
2K 10:1 epoxy primer for quick car repairs. It can be coated using wet-on-wet technique:
- Very strong adhesion to various substrates
- Easy to mixing and apply
- Short hardening time
- Color - Light grey
- Gloss Grade – matt
- Density – 1,51 kg/l
Epoxy Primer 10:1 can be applied over:
- Bare steel and aluminum
- Zinc coated, galvanized steel
- Polyester laminates (GFK/GRP)
- 2-pack polyester putties
- 2-pack epoxy fillers
- Old finishes in good condition
Steel surface should be first degreased, dry sanded and degreased again. The aluminum and galvanized steel should be degreased, dulled with the abrasive cloth and degreased again. The old coatings should be degreased, dry sanded and degreased again. Good preparation is necessary for achieving best results. Following sandpaper gradations are recommended:
- by hand (dry or wet): P280÷P320 (GRP P400)
- by machine (dry): P180÷P220
Volume:
1kg + 0,1kg Hardener
10kg + 1kg Hardener
Color:
Grey
drying time:
7-8 hours
Dry sand:
Yes
Wet sand:
Yes
aluminum adhesion:
Yes
steel adhesion:
Yes
We will be more than happy to answer all your questions regarding this product. Just use the form below.
To basket