Ready to use 1K primer for car repairs. It is designed especially for plastic parts as an adhesion
promoter.

• Excellent adhesion to plastics.
• Extremely easy to use.
• Very short drying time.
• Color - Transparent Straw.
• Gloss Grade – Semi Gloss.
• Density – 0,90 kg/l.

It is designed to be applied on surfaces made of various kind of plastics, especially polypropylene, PP,
and its mixtures.

Note: The coating does not improve the adhesiveness to the surfaces made of polyethylene, PE.

The surface designed for painting should be carefully degreased with detergent and wiped with
abrasive non woven fabric in advance. Then it should be again cleaned with detergent, rinsed with
water and dried with air.

It is recommended to heat the element in the temperature of 500°C prior to commencing painting
works, which will facilitate removing silicone compounds from its surface.

• VOC for mixture = 787 [g/l]

The share of VOC is below 850 g/l. Due to that these products fulfill the EU directive (2004/42/EC)
that sets the VOC value for this product category (B/1), as 850 g/l.